High Current Power Adapter

$69.00
(27 reviews) Write a Review
SKU:
615
Availability:
ESTIMATED DISPATCH WEEK COMMENCING 7TH NOVEMBER
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

Once you have TheGigRig Generator, the heart of our Modular Power Supply System, our High Current Adapters are the next step in creating your perfect power for your board.

The GigRig High Current Adaptors are:

 

1. Mr Universe

The GigRig Mr Universe is an adapter that as been designed to deliver all the current that the new breed of high current draw pedals need, from Strymon to Line 6 to Universal Audio. Mr Universe works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. 

Technical

POWER - 9v in / 9v 1000 mA Isolated out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

 

 

2. SUPA-NOVA

There are loads of pedals out there now that require a higher than normal 9V DC voltage; TRex Replica, the Empress SuperDelay, Providence Chrono Delay, just to name a few. If you own a T.C. Electronics Nova Delay or any of the Nova series then the SupaNova is for you. Want to run your AnalogMan chorus at 12V? Then just pop this adapter on the end of Distributor powered by your Generator and the pedal will be receiving 12V DC. 
Still unsure if you need a Supanova? 
Order a Custom Power Path Diagram from The GigRig Store.

Technical

POWER - 9v in/ 12v 550 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

 

3. DOUBLER

The ultimate 9-18V DC adapter is only a click away! Power your Electric Mistress or old Ibanez AD80 directly from the Generator. Run your Fulltone Full Drive II at 18V for more headroom, any pedal that takes 18V DC and the Doubler is for you. TheGigRig 9-18V Adapter will provide a clean supply and isolate the pedal it supplies, from all the other pedals, in exactly the same way as using the pedals own wall power supply. What’s more the 9-18V adapter will provide reverse isolation, so cross-talk between its dedicated pedal and other pedals is eliminated.

Technical

POWER - 9v in/ 18v 300 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

 

4. EL PASO

15V DC pedals have always been a pain to power but now thanks to the El Paso, it's as easy as sticking this on the end of Distributor and plugging this straight into your pedal. You no longer need a separate (or appropriately named) wall wart, just use the El Paso as part of TheGigRig Modular Power Supply System. Problem solved.

Technical

POWER - 9v in/ 15v 400 mA out

PLUG - 2.1mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

 

5. EVENFLO

TheGigRig Evenflo is an adapter that as been designed to deliver all the juice that your Eventide stompbox series of pedal's need to operate at their best. The Evenflo works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. The Evenflo is also perfect for your LINE6 DL4, FM4, MM4 and ML4 pedals.

Technical

POWER - 9v in / 9v 550 mA Isolated, Reverse Polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

 

6.ELECTROMAN

If you love your Memory Man but the wall wart gets you down, your prayers have been answered. Our wonderful ElectroMan 9-24V DC adapter simply plugs on to the end of a Distributor cable being powered by the Generator. Ideal for use with 24V DC Electro Harmonix pedals, Diamond Memoty Lane and any other pedal that requires an isolated 24V DC supply with 2.5mm centre positive input. TheGigRig 9-24V adapter will provide a clean supply and isolate the pedal it supplies from all the other pedals in exactly the same way as using the pedals own wall power supply. What’s more, the 9-24V adapter will provide reverse isolation, so crosstalk between its-self and other pedals will be eliminated.

Technical

POWER - 9v in/ 24v 300mA Reverse polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase. If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser. This warranty covers defects in manufacturing discovered while using this product as recommended by The GigRig. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters. Damage caused by any of the above circumstances may result in a non-warranty repair fee. Legal: In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. The GigRig will not be held liable to any party for damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will The GigRig be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. The GigRig disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

27 Reviews Hide Reviews Show Reviews

  • 5
    Mr.Universe Adaptor

    Posted by James Herbert on Nov 25th 2022

    Very easy to install, light, clean power. Easy to modify into an existing setup. Runs my Strymon and Hologram pedals with less hiss than the Fender Engine room. Only problem is price, would be a lot more expensive to run six of these and a distributor vs a Strymon Zuma. But a premium product at a premium price.

  • 5
    Doubler

    Posted by Robert Valdez on Sep 6th 2022

    Works and is so convenient to use on my pedalboard. A definite headroom increase on my Pigtronix Disnortion.

  • 5
    Exactly what I needed

    Posted by Matthew Ingallinera on Feb 11th 2022

    Powers my Chase Bliss stuff really well

  • 5
    Timelord and Doubler

    Posted by Dakota Diehl on Feb 1st 2022

    After years of playing thru a modeling system, I decided to go back to using an amp and pedals. Having sold all my pedals over the years, I had to build my board completely from scratch. I decided to go with GigRig for my entire power system and I got Timelords to power a few Strymon pedals and a Free The Tone Tri Avatar. They work great and are super quiet! I also got a Doubler for my Cali76 Stacked compressor. Such a great quite, system and the modular design is great. Super well thought out.

  • 5
    Clean 18V

    Posted by Ryan Williams on Jan 28th 2022

    Have the doubler powering my Chase Bliss Gravitas at 18V. Works great. Isolated and quiet.

  • 5
    High Current Power adapter

    Posted by Allen Kave on Jan 20th 2022

    I basically am giving it five stars from what I’ve seen on youtube. I haven’t tried it because I’m waiting for my G3. When that comes in I will be glad to write a real review.

  • 5
    TimeLord

    Posted by Pradesh Manirojana on Sep 21st 2021

    Got this for Hologram Microcosm (on the way) haven't tried it yet but have been using GigRig for 8 years never had a problem. Will submit a review for TimeLord Later.

  • 5
    Doubler

    Posted by Robert E. Valdez on Sep 14th 2021

    It works well on my AT Angry Charlie AND my Fulltone Mini-Deja Vibe MKII. I use it plugged in to my Sanyo Pedal Juice Power Supply - keeping me UN-connected from the wall and possible noise.

  • 5
    TimeLord Adapter

    Posted by Craig Montgomery on Aug 20th 2021

    I recently purchased the Walrus Audio D1 (delay) and R1 (reverb) pedals. These pedals require 300mA minimum of power. The TimeLord adapters were just the trick and easy to fit into my pedalboard power chain as well. Thanks for the fast shipping, too! All the best!