If you have a pedal that requires more than standard current, you can use a Current Doubling Cable Adapter along with two matching High Current Adapters to provide your pedal with up to double the mA of a single High Current Adapter without the need of a custom shop solution.
One cable supplied, please choose 2.1 mm or 2.5mm connection.
1. Choose the High Current Adapters to match the Voltage your pedal requires. ( table below shows single adapter information)
2. Select the doubling cable with the connector size to match the High Current Adapter (2.1mm or 2.5mm).
3. Plug each output from the High Current Adapter into the inputs of the doubling cable and the single output plug into your pedal or additional cable adapter (if polarity or connection size needs changing)
Single High Current Adapter values:
These cables will not alter the polarity from the High Current Adapters. If you require the alternate polarity, you will require an additional Reverse Polarity Adapter after the current doubling cable.
If you require a change in connection you may require an additional
If you need more advice on the correct power for your pedals our Custom Power Path Diagram service is available here
Or contact email@example.com
1 Review Hide Reviews Show Reviews
Perfect for powering my HX Stomp
If you're using an isolated power supply for your HX Stomp or other high-current pedals, this one is for you. I use this (and a 2.1mm-to-2.5mm non-polarity-reversing adapter) to merge two 500ma outputs from my Strymon Ojai for my HX Stomp. (NOTE: If you're using an HX Stomp like me, and your power supply has 2.1mm outputs, you MUST also order the 2.1mm-to-2.5mm NON-polarity reversing adapter. The other 2.5mm current doubler will NOT work because ALL its connections are 2.5mm, not just the output connection. Use THIS 2.1mm current doubler to connect to your power supply, and use the 2.1mm-to-2.5mm NON-polarity-reversing adapter to connect the current double to your HX Stomp.)